Graphene Ceramic PRO CX10 50 ml
£129.40
Graphene Ceramic PRO CX10 – 10H Ceramic Car Coating 50 ml
- Brand: NANO GO®
- Type: graphene-enhanced, 10H superhydrophobic ceramic coating
- Use: vehicle paintwork, body panels and automotive windscreens
- Volume: 50 ml
Graphene Ceramic PRO CX10 – Beautiful Paintwork, Easier Care
Key Benefits
- Deep, reflective gloss that enhances the look of vehicle paintwork.
- Strong water beading and reduced adhesion of road dirt and contamination.
- Graphene-enhanced, antistatic coating that helps limit dust attraction.
- 10H pencil-scale hardness to help resist minor surface abrasion; paintwork is not made scratch-proof.
- Resistance to weathering and chemical contact.
- Long-lasting ceramic protection, with a declared durability of at least 6 years under suitable conditions.
How to Use
- Wash and thoroughly decontaminate the vehicle. Polish the paintwork where needed, then degrease and dry the surface completely. For surface preparation, use NANO GO Wax and Bugs Remover and NANO GO IPA SCRUBBER as appropriate.
- With a suitable applicator, spread a thin, even layer over an area no larger than 20 × 20 cm.
- Immediately buff with a clean, dry microfibre cloth until the section is completely free of visible streaks and excess product.
- Repeat the process section by section across the surface.
- Protect the treated surface from direct water contact for 12 hours. Full coating activation takes approximately 12 hours.
Product images may differ from the actual product in colour, shape or packaging appearance.
Frequently asked questions
It is designed primarily for compatible painted and lacquered vehicle bodywork and suitable alloy-wheel finishes. Test the finish first. Glass, plastics and specialised coatings require product-specific compatibility confirmation.
The manufacturer's TDS describes strong water beading, antistatic properties, enhanced gloss and colour depth, reduced dirt adhesion and a ceramic layer combining hardness with flexibility. Actual results depend on preparation, application and maintenance.
No. The manufacturer specifies 10H hardness on the pencil scale. This is not a guarantee against scratches, stone chips or physical damage.
Thoroughly wash, decontaminate, polish where necessary and degrease the surface. The finish must be completely clean and dry before the coating is applied.
The manufacturer's TDS specifies applying with an applicator to sections no larger than 20 × 20 cm and immediately buffing with a clean microfibre cloth until streak-free. Application should be performed professionally.
The manufacturer's TDS specifies keeping the surface away from water for at least 12 hours, with full activation in approximately 12 hours. Manufacturer-declared coating durability is a minimum of 6 years.
Product information
Physical properties
Always follow the information on the product label.
Intended use
Professional ceramic coating for car body, windscreen, alloy wheels, and other painted/lacquered surfaces.
Usage instructions
Apply only to thoroughly cleaned, polished, degreased, dried surface. Apply 10–20 drops to applicator. Work into 30×30 cm area. After 2–4 min buff with dry microfibre cloth. No water contact for 12 hours. Full activation 12–24 hours.
Ingredient data sheet
Unit 11 Broadgate House, Westlode Street,
Spalding, Lincs, United Kingdom, PE11 2AF
C10-12 Alkane/Cycloalkane; Xylene; Organic polysilazane compound; Methyltrimethoxysilane; Aminopropyl Triethoxysilane; Triethoxycaprylylsilane; Silica Dimethyl Silylate; Magnetite; Dibutyltin Dilaurate; Dimethoxydimethylsilane; Graphite (nanomaterial); Dimethiconol; Methyl Alcohol
EU market information
Tilžės g. 171-71, Šiauliai, LT-76205, Lithuania
Tel.: +370 618 46400
E-mail: info@nanogo.lt
Website: nanogo.lt
Safety warnings
Danger
Hazard statements (H)
H225 – Highly flammable liquid and vapour.
H302+H332 – Harmful if swallowed or if inhaled.
H304 – May be fatal if swallowed and enters airways.
H314 – Causes severe skin burns and eye damage.
H317 – May cause an allergic skin reaction.
H336 – May cause drowsiness or dizziness.
H412 – Harmful to aquatic life with long lasting effects.
EUH066 – Repeated exposure may cause skin dryness or cracking.
Contains 3-aminopropyltriethoxysilane, Dibutyltin Dilaurate.
Precautionary statements (P)
P101 – If medical advice is needed, have product container or label at hand.
P102 – Keep out of reach of children.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 – Wear protective gloves/protective clothing/face protection.
P301+P330+P331 – IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 – Dispose of contents/container according to the separated collection system used in your municipality.
Packaging
Ecology and recycling
Storage conditions
Emergency contacts
Medical emergency: NHS 111 (24/7 advice)
Life-threatening emergency: 999 or 112
Healthcare professionals only: NPIS 0344 892 0111
