Elite Ceramic PRO CX9 50 ml
£82.89
Elite Ceramic PRO CX9 – 9H Ceramic Car Coating 50 ml
- Brand: NANO GO®
- Type: 9H superhydrophobic ceramic protection
- Use: compatible vehicle paintwork, body panels and automotive glass
- Volume: 50 ml
Elite Ceramic PRO CX9 – Keep That Just-Detailed Feeling for Years
What Makes CX9 Special?
- Deep, mirror-like gloss: enhances the look and colour depth of professionally prepared paintwork.
- Rain that beads away: superhydrophobic protection helps water form droplets and move off the surface.
- Less stubborn dirt: reduces everyday contamination sticking to the finish, making washing easier.
- 9H ceramic hardness: helps resist minor surface abrasion and everyday wear; it does not make paintwork scratch-proof.
- Chemical resistance: ceramic coating designed to withstand contact with chemicals across the pH 1-13 range.
- Built to last: manufacturer-declared minimum 6-year durability with two correctly applied layers.
How to Use
- Thoroughly wash and decontaminate the vehicle, then polish the paintwork where needed. For compatible preparation, use NANO GO Wax and Bugs Remover and NANOCLAY as appropriate.
- Degrease the prepared surface with NANO GO IPA SCRUBBER where compatible, and make sure it is completely dry.
- Apply a small amount of CX9 evenly with an applicator, working on areas no larger than 20 × 20 cm.
- Polish immediately with a clean, dry microfibre cloth until the section is completely streak-free. Continue in small sections.
- For a second layer, wait at least 2 hours after the first layer has dried.
- Keep the treated surface away from direct water contact for 12 hours after application. The coating reaches full activation in approximately 12 hours.
Product images may differ from the actual product in colour, shape or packaging appearance.
Frequently asked questions
It is intended for professionally prepared, compatible vehicle bodywork and automotive glass. Coatings and finishes vary, so confirm compatibility and carry out a test before treating a whole panel or windscreen. Never leave streaks that could affect visibility.
The manufacturer describes 9H hardness on the pencil scale. This refers to a coating hardness test, not proof that paint becomes scratch-proof or resistant to stone chips. Physical damage and wear remain possible.
It encourages water to form droplets and run off more readily and can make routine dirt removal easier. It does not make the car permanently self-cleaning or remove the need for washing and maintenance.
The manufacturer's CX9 TDS specifies a meticulously cleaned, polished, degreased and dry surface. Apply with an applicator in sections no larger than approximately 20 × 20 cm and buff immediately until no streaks remain. Use professional protective equipment.
Yes, the manufacturer's CX9 technical instructions describe applying another layer approximately 2 hours after the previous layer dries. Confirm the procedure for the specific CX9 batch before application.
The manufacturer's technical data sheet for this formula declares a minimum durability of 6 years when correctly applied in two layers. Proper preparation, application and maintenance remain important to the final result.
Product information
Physical properties
Always follow the information on the product label.
Intended use
Professional ceramic coating for car body, windscreen and glass surfaces.
Usage instructions
Apply only to thoroughly cleaned, polished, degreased, dried surface. Apply 10–20 drops to applicator. Work into 30×30 cm area. After 2–4 min buff with dry microfibre cloth. No water for 12 hours. Full activation 12–24 hours.
Ingredient data sheet
Unit 11 Broadgate House, Westlode Street,
Spalding, Lincs, United Kingdom, PE11 2AF
C10-12 Alkane/Cycloalkane; Methyltrimethoxysilane; Aminopropyl Triethoxysilane; Triethoxycaprylylsilane; Silica Dimethyl Silylate; Magnetite; Dibutyltin Dilaurate; Dimethoxydimethylsilane; Dimethiconol; Methyl Alcohol
EU market information
Tilžės g. 171-71, Šiauliai, LT-76205, Lithuania
Tel.: +370 618 46400
E-mail: info@nanogo.lt
Website: nanogo.lt
Safety warnings
Danger
Hazard statements (H)
H225 – Highly flammable liquid and vapour.
H304 – May be fatal if swallowed and enters airways.
H314 – Causes severe skin burns and eye damage.
H317 – May cause an allergic skin reaction.
H336 – May cause drowsiness or dizziness.
H360FD – May damage fertility. May damage the unborn child.
H412 – Harmful to aquatic life with long lasting effects.
EUH066 – Repeated exposure may cause skin dryness or cracking.
Contains Dibutyltin Dilaurate.
Restricted to professional users.
Precautionary statements (P)
P101 – If medical advice is needed, have product container or label at hand.
P102 – Keep out of reach of children.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 – Wear protective gloves/protective clothing/face protection.
P301+P330+P331 – IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 – Dispose of contents/container according to the separated collection system used in your municipality.
Packaging
Ecology and recycling
Storage conditions
Emergency contacts
Medical emergency: NHS 111 (24/7 advice)
Life-threatening emergency: 999 or 112
Healthcare professionals only: NPIS 0344 892 0111
